injection machine IMM14000

Description

Specification:
 Feature
  1. Clamp unit
 
 The clamping unit is quick moving platen, running placidity moving speed over 36m/min.
  Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.
 
 End point positioning controlled by high precision transducers.
  Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.
 
 Tie bars with unload slot marches spring nut can be constant of using for long time.
  closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.
 
 five points holding pressure to clamping processes computer-optimized.
  2. Injection unit
 
 n opposed cylinders ensure parallel injection movement.
  ew cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
 
 3. Hydraulic system
  ustable backpressure and zero backpressure may be option.
 
 egrations valve board is response soon and high precision.
  raulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
 
 4. Electrical control unit
  a) There is 3-manners of manual, semi-auto, automatic in the menu.
 
 b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.
  c) The menu of special computer imported has two color: one is black and write, other color.
 
 
 
SPECIFICATION  
A B C D
INJECTION UNIT  
SCREW DIAMETER  mm 110  120  130  140 
SCREW L/D RATIO  L/D 26.18  24  22.15  20.57 
SHOT VOLUME(THEORETICAL)  cm3  5559  6616  7765 9004 
INJECTION WEIGHT(PS)  g  5059 6020  7066  8174 
INJECTION RATE  g/s  815 970  1138  1320 
PLASTICIZING CAPACITY  g/s 114  127  145  175 
INJECTION PRESSURE  MPa  208  175  150 129 
SCREW SPEED  rpm 95 
CLAMPING UNIT  
CLAMP FORCE  kN  14000
OPEN STROKE  mm  1350
SPACE BETWEEN TIE BARS(W*H)  mm  1310*1300
MAX.MOULD HEIGHT  mm  1400
MIN.MOULD HEIGHT  mm  600
EJECTOR STROKE  mm  360
EJECTOR FORCE  kN  260
OTHER  
MAX.PUMP PRESSURE  MPa  16.5
PUMP MOTOR POWER  kW  55+55
HEATING POWER kW  82
MACHINE DIMENSION(L*W*H)  m  12.60*3.00*4.00
OILTANK CUBAGE L  2900
MACHINE WEIGHT  t  90